4.2T gantry lift (double sided unlocking)

Maximum lifting weight: 4200kg
Maximum lifting height: 1920mm
Total height: 3835mm
Shortest front rocker arm size: 740mm
Longest front rocker arm size: 1150mm
Shortest rear rocker arm size: 890mm
Longest rear rocker arm size: 1390mm
Minimum support plate height: 95mm
Total width inside the column: 3000mm
Lift limit height: 3706mm
Motor performance: 2.2kw
Rise time: ≦60 sec
Descent time: 20-60 sec

●Rated load 4200KG, easily passed 120% dynamic and 150% static load professional test standards.
●Manual double-sided unlocking and 24V low-voltage operating device.
●The column bottom plate is 500mm wide, with a large contact area with the ground, and the lift is more stable and reliable.
●The upper crossbeam design has a maximum height of 3835mm and an effective height of 3706mm, which is more suitable for lifting high-roof vehicles.
●Standard 2+3-section arm, equipped with quick-insert adjustable super-full tray, the minimum height from the ground is only 95mm, suitable for vehicles with different chassis.
●The pulley in the column is installed toward the cylinder side, even if the retaining ring falls off, it can effectively prevent the pulley from falling out.
●The crossbeam is equipped with a device to prevent the pulley and wire rope from falling out.
●The sliding block made of oil-free polymer super wear-resistant material has a long service life, stable and reliable operation, and can be quickly replaced and adjusted.
●The use of aviation steel wire rope can effectively ensure the synchronization of the two sides. The Yankong steel wire rope has good linearity, small diameter tolerance, and soft waiting point, which can better meet the use requirements.
●The hydraulic cylinder joint is equipped with a pipe explosion throttle valve to effectively prevent accidents caused by oil pipe bursting.
●The main structural parts are welded by robots, with good welding consistency, high strength and beautiful welds.
●The structural parts are sprayed with imported powder, sprayed with imported spraying equipment, and high temperature chemical treatment, which can ensure strong adhesion and bright and beautiful colors.